Mapping 4.0.6 - "This midi code is already assigned" (midi in)

I am trying to change the mapping in my SX controller
I want to change that IN & OUT of the loop will be STRAT & REC of Sequenser IN RB 4.0.6
I get this message "This midi code is already assigned" (midi in)
I plugged in addition controller of AKAI LP8 hands of free of mapping and a got the message why it happens ?

So something here I do not understand, I checked and deleted all command or order of these buttons too, even I composed this controller did not give blank map, certain parts of the software is locked to the remapping

Roby Noy Dj's 4. Februar 2016 09:45

Post ist für Kommentare geschlossen.

Datum Stimmen

4 Kommentare

@Roby > If you want to change the defaults of the SX mapping, there's a bit of monkeying around to do, but I'm in the midst of creating a guide to doing this so I'm not going to post how here.

If your AKAI sends the same MIDI signal on the same channel as another signal from the SX, it will encounter that error. You may be able to change the output MIDI channel on the AKAI so it doesn't conflict.

Pulse 4. Februar 2016 19:32 0 Stimmen

Excellent maestro anxiously awaiting technical guide explaining how to map, why should it be so complicated?

Roby Noy Dj's 5. Februar 2016 06:30 0 Stimmen

It's not terribly difficult, but it's the remapping of predefined controller configurations that's not exactly easy for the average user as it's designed to prevent them from accidentally editing / overwriting standard functions.

Pulse 5. Februar 2016 06:33 0 Stimmen

I have a pair of cdj400 & x1 I made a perfect mapping to rb 4.0.6, and yet I want to change some things in my SX, then I'll be glad to get explain how it's done

Roby Noy Dj's 5. Februar 2016 06:58 0 Stimmen