Using Channel Faders on S9 triggers pads on right channel

I have noticed when I am in hot cue mode & I use the up faders to cut/increase volume the mixer registers the fader reaching the top of channel fader as contact & engages the pads....so if I have a brand new song w/no cue points on the right channel and I begin using up faders It will begin making new cue points til all 8 cues are placed!!!

So annoyinng! Using the left channel up faders can also trigger this on the right channel as well but it's definitely more sensitive when using the right channel up faders.

I was trouble shooting and noticed if i tap the face plate of the mixer by the channel faders it can also trigger the cue pads on right channel.

Yesterday I updated my firmware to the most recent verson 1.06 and issue still exists. Do I have a faulty unit??

Anyone else having this issue.

Pioneer please advise!!

chorizo funk 10. Februar 2016 22:04

Post ist für Kommentare geschlossen.

Datum Stimmen

13 Kommentare

I would suspect that you have a MIDI mapping left over from something that is causing that to happen. Check your MIDI settings in Serato to see if any exist, or disable the settings for remap.

Pulse 11. Februar 2016 05:50 0 Stimmen

I restored the midi mapping to default & disabled the option to allow serato hardware remapping and disabled the enable output lighting. Same thing is happening!

This is making this mixer un-usable! Pioneer please respond!

Chorizo Funk 12. Februar 2016 05:47 0 Stimmen

BTW, upon further testing I have to move the channel fader from the bottom all the way to the top. If the fader is at a few millimeters from the bottom position then I move the fader up it doesn't trigger the cue button.

PLEASE HELP PIONEER!

chorizo funk 12. Februar 2016 05:51 0 Stimmen

Hmm, I've passed this one to the product team for a bit more info, if it's not a MIDI trigger in Serato, I'm confused as well!

Pulse 12. Februar 2016 07:20 0 Stimmen

Can you give me details as to which operating system, which version of Serato, which S9 driver you have installed?

Pulse 12. Februar 2016 07:22 0 Stimmen

mac os 10.9.5

serato dj 1.8.1

djm version 1.06

BTW I noticed that If I hold down the shift button on the S9 and use the upfaders up and down it does not trigger the cue point behavior as described.

chorizo funk 12. Februar 2016 16:33 0 Stimmen

So I just set the pad mode to saved loop and when I move the fader up & down on the right channel. It is turning the 8th loop on/off. So the up and down fader motion seems to be triggering the 8th performance pad. So if I am in hot cue mode it will create cues untill there is an 8th cue point. then it will just continually trigger the 8th cue point.

chorizo funk 12. Februar 2016 16:49 0 Stimmen

go into the serato midi panel for loading mappings. choose new. do not map it.

should solve the problem.

i had the same problem with the left upfader starting the right channel when i raised the left line fader with my existing mapping(which was for a native instruments x1).

i remapped my midi device but left out cues and rotary scrolling for library and loops(its on the mixer) and its fine.

feezy f feezy 14. Februar 2016 00:52 0 Stimmen

@chorizo > Does @feezy's solution work for you?

Pulse 16. Februar 2016 00:57 0 Stimmen

No it didn't change anything for me. moving the fader up & down is still triggering the 8th pad.

Im starting to think this is a hardware issue specific to my mixer. What's next?

chorizo funk 16. Februar 2016 05:38 0 Stimmen

Any help on this?

By the way I installed serato dj 1.8.1 on a mac with os 10.11.1 and the same thing keeps happening when I use the other computer as well.

chorizo funk 18. Februar 2016 18:48 0 Stimmen

@chorizo > Sorry, still waiting to hear from our engineers.

Pulse 18. Februar 2016 18:50 0 Stimmen

Ok thank you Pulse. I am starting to think I should just return this mixer.

chorizo funk 22. Februar 2016 22:09 0 Stimmen