After updating brand new xdj rx to 2.00 channel signals, buttons (sync, master, etc) went off when using traktor, only master volume lights are on and all the other pads are lit up. tried reinstalling traktor and drivers but it doesn't still work correctly. Please help
I'm happy to let everyone know that there will be a new official TSI available this fall which offers much improved performance with Traktor and the XDJ-RX. Watch our News section or social media feeds for additional information.
Post ist für Kommentare geschlossen.
i have the same issue...
Hello guys ! I'm working and I have almost solved the problem! but 'you have to use the console with midi mixer because otherwise it does not work the mixer! I managed to fix the mapping now me work all LEDs except the jog because I do not know the notation of the jog LED! it takes time for the rest I arranged several things like vu meter!
After changing the setting in audio midi controller to a new configuration rekordbox now works great except waveform. Dont know if its a bug or they just dont want to put waveform on screen while using rekordbox dj
@baer gianluca are you talking about traktor?
yes traktor
my mapping,
mettere il mixer in midi mode . tenendo premuti tasti reverse i potenziometri alti medi e bassi sono i tre effetti knob, e il knob vinil speed e il dry wet degli effetti rispettivamente nei due deck , il button dell effetto si attiva muovendo gli knob, rimangono liberi tutti i tasti dei color effect e dei beat effect del mixer non li ho mappati, il tasto tag rename porta traktor in full screen, il resto loop mixer play cue jog vinil mt sinc hot cue slip rimane invariato e funzionante , in più funzionano anche i led dei jog ed il vu meter,
put the mixer in midi mode. holding down the reverse button equalize the potentiometers are the three knob effects, and Knob vinyl speed and dry wet effects respectively in the two deck, the button of the effect is activated by moving the knob, remain free all the effect of colored keys and beat effect of the mixer I have not mapped them, tag rename button brings traktor in full screen, the rest mixer loop play cue jog vinyl mt sinc hot cue slip remains unchanged and running, more LEDs also function of jog and vu meter,
i have the same issue...maybe new mapping from Pioneer ?:) or firmwere downgrade to,if we can
You just need to update your mappings for Traktor.
@pulse seems that my problem is the same. Everything worked almost perfect with traktor until the latest xdj-rx firmware update. Now the problem is that the lighting is not working properly. E.g effects knob is lit and not blinking if it's on, loops are not lit if I use them etc. It does not matter whether I use xdj-rx as mixer or midi as mixer. I of course prefer using xdj-rx as mixer and it worked before the firmware update. So what did you mean "you just need to update you mappings for traktor" sinc I am using the one which is on pioneer official site https://www.pioneerdj.com/en/support/software/xdj-rx/ Please help!
@Priit > I hope you understand that with the firmware update, the input/output mappings for the RX changed, and as a result, the TSI file available from our official site does not work with the RX. You will have to manually adjust the mappings to have full functionality.
Pioneer DJ is not prioritizing updating the TSI file at this time.
As an alternative, you can try downloading the map that DJ Hairless has posted here.
@pulse Thank you for your quick answer! Dj Hairless mappings do not work if I use RX as mixer. Furthermore it does not work correctly for me even if I use mixer in midi mode, which I know should be the precondition for it to work. Anyways I understand that acutally it is possible to get the lights blinking only I have to map them manually one by one in traktor mapping? Or is there possibility to downgrade firmware to a 1.8?
@Priit > I haven't used his mapping so I'm not familiar with its function.
You would have to manually map the LED outputs yourself. There is no downgrade available, sorry.
thank you again but sorry about my frustration. What or how should I map if I want to use the RX's mixer? Not the midi but pioneer's own mixer with pioneer effects!? I do not understand how the leds are not working on RX-s mixer if I am using the RX-s mixer and not the MIDI one!?
@Priit > If you want to use the mixer section of the RX as an audio mixer, you would just go into the UTILITY menu on the XDJ-RX and change MIXER MODE to XDJ-RX.
In Traktor, assign the XDJ-RX as the output audio device, then on the routing page, select EXTERNAL mixer mode and set the outputs for decks A and B to be the four outputs available. Now Deck A should send to CH1 and Deck B should sent to CH2.
All of the mixer effects (COLOR and BEAT) will operate normally; if you're on the MIDI page and can't see the parameters, simply press the BROWSE button and the screen will change.
@pulse please see the video!!! https://youtu.be/nvQq8ZVqysw
that is what I am trying to tell here! I do not understand how it can be that with latest firmware update the mixer's lights if used as separate audio mixer don't work! It worked before the update. Everything works fine with Rekordbox but I have my own reasons why I prioritize Traktor at the moment! Once more, please help fixing the glitch!
Okay, I follow you now -- there wasn't a clear explanation that the LEDs of the mixer section were not responding when using the XDJ-RX mixer mode.
I'll ask the engineers to elaborate on the configuration.
The LEDs are configurable as an output from within Traktor, even in XDJ-RX mixer mode, this is why they don't illuminate or change when the FX are selected / engaged.
Dear pulse,
So what we need to do to make this product work like it worked in 1.6 / 1.8 version?!
All the lights worked fine!
Everything worked perfect!
I bought this product because it was work perfect with traktor.
Now its not.
What can we do?
Guy raz
I'm exactly in same situation!!!
@Guy > You need to create a TSI with MIDI signal to output to the LEDs accordingly.
No, you wrong @pulse.
There is nothing to do with the tsi to the rx.
Its a b-u-g of pioneer!
And i know it because if u put deck A on usb mode and deck B still play from traktor all the lights become activate and work fine!
I will record that and uplaod so u can quickly understand me.
Tsi, mappings, or other ideas u say - wrong thinking.
@Guy > The 2.1 firmware, which changes the operation from MIDI to HID, changed the function of the mixer section. In order for the levels to illuminate they must be mapped within Traktor.
I'm closing this topic because clearly you will just continue to argue with me to the contrary, even though this is what the product engineers have told me.