I had a gig this past weekend where some silly (very drunk) goose bumped into my area and managed to cut the power to my NXS2 system (2 x CDJ2000NXS2 + DJM900NXS2). He swiftly expelled from the venue and luckily I had a separate line mixer with an iPad plugged in for emergencies, so all was not lost. I digress.
Once I managed to power up the NXS2 system again, I noted that the Pro DJ Link system (Export Mode) didn't automatically connect. I reset Rekordbox thinking this would solve the problem, but no luck. I tried a few more times and still no luck. I ended up having to power cycle my trusty MacBook Pro and everything was back to normal once I started Rekordbox following the restart.
The next day I re-enacted what happened (abruptly cut power to NXS2 system) and sure enough, I was able to recreate what happened the night before.
Having said that: if this situation were to happen again, is there a way to "reset' the Pro DJ Link protocol so that Rekordbox will "see" the network connection, so I don't have to restart my computer?
I would have expected it to reset itself after everything was powered up and reconnected. Other than running a TCP/IP stack reset on the computer, or resetting all self-assigned IP addresses, I think restarting the computer is probably the easiest way to remedy that.
Post ist für Kommentare geschlossen.