1st off let me just say how poor this dvs extension to rekordbox is. I wish I had not even purchased it. I bought it 2 days ago and have not once been able to pull off a decent mix due to the bpm fluctuations on both turntables - something I now see most people are having issues with. Issues I've never had with serato or rekordbox
So how do I fix it? My spec is fine, my decks are newly serviced (1200mk5) I ran a test with 2 vinyl not timecode of the same bpm and set the pitch to zero and the tracks lock perfectly.
Try to mix any wavs with rekordbox dvs and bpm will continuously move from 124 to 123.8 - 124.1
I have set analyse tracks to normal (the tracks are not vinyl rips) and I am using the power supply with rekordbox So I do not burn cpu usage,
This is really annoying me the fact that this product just simply does not work and it's highly unlikely now I can get a refund as it's been opened and used.
It doesn't look like pioneer have really addressed this issue from my research. Bad look pioneer
One of two things...
1) Your tracks are analysed with dynamic mode instead of normal mode, thus causing an irregular playback when it should be a consistent beat.
2) The vinyl you're using had an issue during pressing and should be swapped (you could try side B and see if the issue persists).
Post ist für Kommentare geschlossen.
I'm slightly confused, you said you never had fluctuating BPM with Rekordbox before but now you have? Or were you using CDJs/just laptop before this?
I've noticed fluctuating BPM before and report it so the engineers can keep looking at it.
Luckily I don't do long blends and don't mind making slight adjustments on my turntable, as it helps to train my ears. But understand it can be annoying for some.
To say the product (DVS) doesn't work is exaggerating, if it didn't work it would not pick up the files from software. I would say it isn't tweaked correctly to handle these adjustments, Something Pioneer should focus on if they are interested in improving their DVS.
Was this solved? Im having the same issues
I'm having EXACTLY the same issue. I've been trying to get a mix going for the past 2 weeks, every time I start something glitches and I feel like throwing the whole kit out the window. Using Macbook pro, Technics 1200s, Vestax PMC 06, all updated to the latest firmware etc.
@Wilhelm > And have you checked the analysis mode of the tracks you're mixing?
Yeah, it's set to normal. I'm about to ditch the whole set up and go with Serato. Just way too complicated. Also, the forum is a nightmare to use. Can't log into it in Safari.
To remedy the forum issues, please verify that Safari is allowing 3rd party data, and then clear the cookies and cache for the following domains:
*.pioneerdj.com
*.zendesk.com
*.gigya.com
As for the DVS wandering, can you tell me the number located on the label?
What label?
The DVS vinyl label -- RB-VS1K, for example.
Does it happen on both the A and B sides?
RB-VD1-k
Initially using both A sides but will try the right deck with the B side
I've tried multiple fixes. Swapped back to the original USB cable. Swapped each vinyl around. It just seems to flip out as soon as I put another track on and use the vinyl or use the crossfade.
If I can't get this fixed I think I'm going to have to jump ship and ditch Rekordbox.
I just bought PLX 1000 and RB VD1 W and have the same issue with tracks analysis in normal mode. Anyway to fix this issue?
You may want to try adjusting the noise level in the DVS settings for each deck to allow it to compensate for the small variations.
I am also having same issue. I see a comment around analysed in dynamic or normal? How do I do that?
Also does anyone have any other fixes other than try side A or B on the vinyl? Was so happy when my PLX500's arrived with the DJM 450 but now so disappointed and considering selling them. (Only had the 8 months)