No audio signal to djs1000 from 1 CDJ 2=Cdj Nxs2 DJS1000 djm900Nxs2 Toraiz sp 16 and AS1

No audio signal to djs1000 from 1 CDJ

2 X CDJNxs2 DJS1000 DJM900Nxs2 Toraiz sp 16 and AS1 Everything is connected with Ethernet cable via a hub djs and mixer with send and return each cdj to mixer with RCA’s . AS1 to toraiz midi cable and jack plugs From toriaz jack plugs to rca lead to mixer .

when I select live sampling I don’t get audio signal from 1 cdj although it’s sync data is , sometimes no signal from either cdj , is there a problem or am I missing something, your guidance would be greatly appreciated

Dj Mr.H 2. Februar 2019 09:20

Post ist für Kommentare geschlossen.

Datum Stimmen

2 Kommentare

@Mick > How do you have the audio connected from the DJM-900NXS2 to the DJS-1000? Do you have the DJM SEND outputs connected to the INPUT on the DJS?

And then how do you have the return connected? Is the OUTPUT from the DJS connected to one of the channels as a line input, or do you have it connected to the RETURN?

If you're using the S/R loop, you'll need to select the sampling source from the FX channel selector, then engage the S/R ON/OFF button.

If you're using an AUX loop, the same applies as above, but you'll also need to set one of the DJM channel inputs to AUX RETURN to have the audio come back into the mixer.

Pulse 4. Februar 2019 19:31 0 Stimmen

Thank you I had no idea I needed to select the channel fx that would explain why it seemed random . Great sorted thanks again.

Dj Mr.H 19. Februar 2019 01:55 0 Stimmen