Record box interface 2

I’ve just bought an interface2 to use on my reloop turntables. I’ve set it up today and it’s working ok. My problem is my levels are sky high in the red?? Any tips would be grateful,easy the better as I’m not that PC savvy

Ruffle 1. April 2020 15:18

Post ist für Kommentare geschlossen.

Datum Stimmen

7 Kommentare

Are you connecting the LINE outputs from the IF2 box into PHONO inputs on the mixer?

Pulse 1. April 2020 17:19 0 Stimmen

I’m using the line inputs on the mixer??

Ruffle 1. April 2020 17:35 0 Stimmen

As long as there's no phono/line toggle on the back of that input and you're certain the setting is LINE, then the other thing to consider is that your channel gain/trim might be too high. Turn it down.

Pulse 1. April 2020 17:37 0 Stimmen

No there’s no toggle on that input,I’m having to turn everything down real low to stop it red lining.amp and main volume and trim/gain,if I mix to vinyl then that’s real quiet

Ruffle 1. April 2020 17:41 0 Stimmen

It's normal for vinyl to have a lower input than a line level audio, and the need to adjust the gain on every song is also expected.

Pulse 1. April 2020 17:42 0 Stimmen

Yeah I know that as I’m coming from a controller to vinyl mixing,which seemed closer on the trim,it just seem there’s a huge difference from the control vinyl to standard vinyl a good 5/6 levels

Ruffle 1. April 2020 18:29 0 Stimmen

That's normal and I wouldn't see it as an issue.

Pulse 2. April 2020 22:53 0 Stimmen