Currently, we are considering support for XDJ-XZ.
Please wait.
Aktionen für Kommentare
Post
Folgen
DE Pioneer XDJ XZ - Rekordbox Controller Deck Loop In/Out Adjust not working
When XDJ is used as a controller for Rekordbox 6 Deck the Loop In/Out Adjust is not working. Usually when selecting LOOP IN the start point of the loop shall be moved when turning the jogwheel outer ring.
This is working fine in USB (standalone) decks on the XZ but not with Rekordbox controller decks. (like shown in the video)
The points can only be moved when either turning the outer ring of the jogwheel very fast or when pressing the platter down while turning (also shown in the video).
I had this problem beginning of september 2020 with the XDJ XZ on Firmware 1.10 and with Rekordbox 6 (but the version from beginning of september 2020 so older than 6.4.x version)
Is that problem solved now with new Rekordbox 6.4.x version and the firmware 1.12?
Post ist für Kommentare geschlossen.
Datum
Stimmen
7 Kommentare
@tomo : Thanks for the feedback.
For me it would be interesting if
- either the problem is fixed already
OR
-if this problem is officially considered a problem and will be fixed in the future.
I would also consider buying the unit in case the problem would be fixed in the future. ;-)
So whenever there is an update on this. Please let me know :)
Aktionen für Kommentare
It will be fixed in the future.
Aktionen für Kommentare
@tomo : Perfect! Thanks :)
Aktionen für Kommentare
@tomo : You are also working for Pioneer DJ support, correct? Just because normally Pioneer DJ members have the logo in their account. Or if not where do you have the information that this issue will be fixed?
Sorry for asking again ...
Aktionen für Kommentare
Tomo is one of our members from Japan. He's got insider knowledge on what's going on, so I'd trust him. ;)
Aktionen für Kommentare
@Pulse : Thanks :)
Aktionen für Kommentare