Hello Ive had the XDJRX for about 16months now.
Ever since the last 2 firmware updates the TEMPO randomly changes when I have 2 song perfectly beatmatched
Example:
Song 1 = 88 BPM
Song 2 = 88 BPM
It seems within 16 or 32 bars "one" of the tunes will randomly change to 88.5 or 87.5 or 90 bpm.
Note: It is never a consistant number it changes to
Firmware 1.8 did not have this issue (2.XX has started this issue)
Also Note: Both Platters will flash in tandem, when the flashing happens its freak out time 0_o & you better be quick to correct it. Basically I can no longer walk away from the decks :(
I have confirmed this issue using raw USB , RekordBOX DJ, Serato & Virtual DJ
I've tested Virtual DJ just to confirm it is not Software related. It started after I updated the firmware from v1.8 to 2.XX (it did it with v1.8, but once or twice within 1000hrs of use ) (ever since version 2.XX it happens within 10mins of use).... Note: Firmware 2.21 did not fix this at all.
Please tell me this is known and I do not have to analyze my songs to prevent this?
It is clearly a Hardware / firmware issue.
Thanks in advanced , praying to the Gods
:)
@Aaron > Have you checked that the songs haven't been analysed with Dynamic mode if they are a constant tempo? That could cause the BPM to fluctuate as the algorithm is designed to adjust to a variable timing in the tempo. If you use the wrong mode (Dynamic vs. Normal), you'll find that happening quite often, especially when sync is engaged.
Post is closed for comments.
Yes i analyze with Normal Mode
Been a year and still no fix to this after updating all Driver and software over the year.The Platters flash then one track will just change BPM randomly.
My Friends XDJ-RX2 does not have this problem "at all" using my same Tablet. Using VDJ or Rekordbox. Happens less in Rekordbox but still happens.
If i use my XDJRX with a MAC it happens also.
It is definitely hardware related & it seemed to start "after" Firmware 1.8...
@Aaron > Sorry I missed your post / follow-up from November. If you're still having this issue, please provide me with a bit more information...
- Does this happen when using the RX as a controller only or does it also happen when DJing from USB devices, and is the issue consistent across all sources?
- What is the computer spec (CPU, RAM, OS version, etc) of the computer you've used it with (both the Mac and PC)?
- With which software versions does this occur?