what am i NOT doing right to get audio when connecting my iPod to DDJ-T1? the L/R audio cable are plauuged in th back and AUX switch on the front is ON and i can see the equalizer play but no audio through my speakers. help anyone.
Post is closed for comments.
The L/R audio cable coming from your iPod are connected in the back? The AUX switch from the front pannel is for the MIC front input, which can be used as mic or as AUX with an aux device. And that's not all... you have to configure Traktor with the aux channel... can you be more specific regarding your Traktor config/setup?
You need to assign the AUX input as an input for one of the channels; without it, nothing comes out from that input.
I have the same problem, but I have routed everything in the way you've described (see attached)
Still no sound from fader A.
switch is on AUX, volume is up and onnection is on the Aux in. Seems the controller is picking up the signal but not sending it out. Any ideas?
@Jason > You have the AUX set-up fine, but you haven't set it to one of the decks within Traktor. There's info on how to do this in the Traktor manual.
I had this issue til I realised the AUX input doesn't function if you're using USB power - only with the DC input.
go to page 23 in the manuel youll find it..
Correct, certain functions are disabled when on USB power only.