1) Are you using Traktor 2.1.1 or newer?
2) Have you updated the firmware to 1.10?
Comment actions
Post
Follow
PIONEER DDJ ERGO WITH TRACTOR PROBLEM
Hello
I have some questions.I just buy a controler and test with original virtual dj le.It works good.And then i test with VIRTUAL PRO ....her is a little problem.....a jog-s work opposite as with cdj........
the second problem is with Tractor.........i download and install everythink the instructions say in this web side:http://pioneer.jp/support/download/dj-e/ddj-ergo-v/
but the really some buttons or functions dont works........example......FX1,FX2 dont work-no effects,the button Control,1,2,3,and key ON,1,2,3 not works (the contorl button you can not choose effects such as in virtual dj).......
.the next think is HEADPHONE......not works ,...i turn the button VOL and MIX and stil not working...........no sound from HEADPHONES.....
then.,...when you set your song on a single channel play normal ......... but then I want to close the channel by sliding potencjometrom, this still plays .... sliding potentiometer not working .........
and the crossfeder not working..........
what can be done to the Controller will operate on all controls in the tractor, as contoler ... nice work on the program to all DJ.Da virtual keyboard and buttons act like the virtualu dj ......
Post is closed for comments.
Date
Votes
5 comments
[quote]but the really some buttons or functions dont works........example......FX1,FX2 dont work-no effects,the button Control,1,2,3,and key ON,1,2,3 not works (the contorl button you can not choose effects such as in virtual dj).......[/quote] this could be a fault on the demo version of Traktor.
First thing to say, you have to upgrade your firmware to 1.10!
After that you have to use Traktor 2.1.1 ore above !
Comment actions
Hi!!
I have same problem with the effects buttons, and also when I'm searching the songs with the Ergo's jog they are not following the normal order (1, 2, 3, 4, 5, etc...), it jumps 1 to 5 to 10 to 15 to 20...or 1 to 6, to 12, to 18, to 24 and so...
Firmware is v1.10 and traktor version updated to 2.1.2, mapped with tsi from Pioneer.com
any idea, please??
Comment actions
You can try to set the "Sensitivity" for the Rotary Encoder to an near 80% Value in Traktor to solve the Problem,
In Traktor Choose "Settings"
Controler Manager
Search for the Controle value > "list select Page Up/Down" as Argument "Global" with mode "Relative" and mapped to "Mixer Browse"
If u find them - select it by Click and set in the "Rotary Encoder" Section the "Rotary Sensitivity" value to 80% and Test it.
On my DDJ-T1 there is a Value of 100%, just try, what´s good for you.
greets
Comment actions
ok...i will try,,,,,thanks for informations
Comment actions