Anybody help on this one? I've finally got both my CDJ 2000 decks working as controllers with Traktor 2 Pro but they only play through one channel on my DJM800. They play through either channel 1 or 2 depending on which deck I switch on first linking to Traktor.
Both decks seem to work independently properly as controllers (Now that I've set the HID setting to STANDARD). It was the Pioneer forums that guided me to this setting, not the Native Instruments site. I'm working on a Windows platform but I keep seeing comments about "aggregate soundcards"!
I've spent the last week configuring instead of playing. Help somebody, I've seen loads of comments about playing only through one channel but I've not spotted a solution.
Dzr G.
Post is closed for comments.
@Dzr G > The problem you are encountering here is that you are using two sound cards (2x CDJ2000) but Traktor encounters issues trying to support these. However, there is a simple workaround. Please download and install ASIO4ALL.
When you have this done you can then select the sound card driver as the Audio Device and route the output to the respective sound cards (i.e. the CDJs) with the ASIO4ALL interface.
i faced a similar issue with Traktor on my MACbook PRO....Please can you give me a solution to this.
I dont use but did test Traktor 2 Pro with my 2k mk1's and its the only way to get THEM working 100%. Probably you are doing something wrong with the configuration options. Double check the Output Routing options.
@Dzr G > Did my help resolve your issue?
@Deejay Sherwin > You'll need to follow similar steps but use the CDJ Aggregator.
@Stroboscope > Thanks for your input.
Guys, any follow up?
I dont know if he already sorted it out so I did all the testing here again and following the necessary mods on configuration:
Audio Setup > Audio Device > Pioneer CDJ ASIO (ASIO)
Audio Setup > Built-in Soundcard > Pioneer CDJ ASIO
Output Routing > Mixing Mode > External
Output Routing > Output Deck A > L > 3:CDJ-2000 2 L
R > 4:CDJ-2000 2 R
Output Routing > Output Deck B > L > 1:CDJ-2000 1 L
R > 2:CDJ-2000 1 R
(if you get inverted channels on mixer just invert A and B settings)
Controller Manager > Device Setup > Device > Pioneer CDJ 2000
Controller Manager > Device Setup > In-Port > CDJ 2000
I think all the other options are personal ones. If you still have problems just give me a feedback and Ill try to figure it out
Oh forgot to mention... I dont know if theres any other way to connect the CDJS to the pc but I did it with two usb independent cables.
@Stroboscope > I really appreciate your input in this thread - thank you.
@Dzr G > Were you able to follow Stroboscopes instructions and set up correctly?