There is no advanced HID with Traktor. Have you tried both on the powered hub at the same time?
Comment actions
Post
Follow
Traktor cdj900 problem with usb connection.
I have 2 cdj 900s connected to Macbook pro. One is directly to usb port and the other through
a powered usb port. One deck will always play perfect and the other will have bad audio, move backwards and generally
just not work properly. I have switched usb ports and tried different configurations also changed aggregator around. It seems to be from usb direct to computor.
When i use the powered hub deck all is well. So what could it be. Also I cant get advanced HID
Post is closed for comments.
Date
Votes
10 comments
Possibly different firmware? Not assigned correctly...?
Comment actions
Hi
Thx for the respnses. Have tried both usbs in powered hub and still wont work properly. Have 4.10 firmware on both decks. Will try make a short vid. Thx
Comment actions
@Graham > Sounds like you don't have things mapped correctly. I'm sure your video will be able to tell us more.
Comment actions
Ok boys in traktor 2.5 i can use Advanced HID and both cdjs work perfect but there are audio bugs in 2.5 so i have swtced back to 2.1.3.
Now in 2.1.3 you can only use standard HID and thats when the problem in the vid happens. Rekordbox akso runs perfect via midi through the cdjs on Advanced HID.
Its not really hindering me as such as i can still use timecode. But frustrating. Have a look c wot u think
Comment actions
You've got both decks set to A, you need to set one encoder to A and one to B to coincide with the decks on Traktor.
Comment actions
My bad....you got the decks set correctly. On my windows set up the sound out put is different but you're using a Mac
Comment actions
@Graham > Have you tried swapping around USB cables?
Comment actions
First, you shouldn't be using Advanced HID, it's not yet fully supported. Second, as "Needs" suggested, you have to set each deck when you load the software (turning the encoder knob to select deck A or deck B). If you are still having problems, you may try running the setup wizard again and select the CDJ900 as the hardware used.
Comment actions