Is there a way to connect in midi my cdjs 850 control my traktor 2.6? I have 2 x USB 3.0 on my macbook pro 2012 with Mac Osx 10.8.2. I've tried to map thing but I've obtained only to use my cdjs as soundcards (with cdj aggregator). If I try to control the jogwheel or press play/cue nothing happens. I have the latest firmware installed (1.08). Please help!
Post is closed for comments.
@Raffaele > Do you get any response in Traktor at all? Have you tried running a MIDI monitor to see if you are getting any signal?
If you have a USB hub, try placing it between the CDJs and the USB port on your computer.
hello.
i have a windows 7 64 bits computer with usb 3.0 and I have also this issue.
I'm able to use cdj as output soundcard but no midi messages between cdj and pc.
could you help us?
I am able to use the cdj 850s with usb 3 with traktor but have to say works better with VDJ with windows 7 and windows 8 64bit.
There looks like there are issues with usb 3 drivers though, they seem to be a bit hit and miss.
A work around that seems to help most people is to plug a powered usb 2 hub into the usb 3 port and connect through that.
Hope this helps
I will check it this night. I will post the results today.
Thanks for your help!!!
I have checked it with a usb2.0 hub and no news. it does not work.
I'm going to open a new post
Can you guys try following this guide and see if it helps: http://pioneerdj.com/support/files/img/CDJ-850-TRAKTOR_En.pdf
Please report back if problems persist.
of course it persist. I made this the first time.
Have either of you tried using a MIDI monitoring application to see if the computer is receiving signal at all?
Mac - MIDI Monitor
PC - MIDI OX
yes, no midi messages.
When I use my xone 4d, i can see lot of midimessages.
@Eduardo > Do you have access to another computer with which you could test the CDJ to see if it's the CDJ or the computer / USB port?
the cdj works properly in other windows7 64 bits.
@Eduardo > And is that also a USB3.0 port?
No, the other windows7 64bits is not USB3.0
@Eduardo > Do you have access to a USB hub (powered preferably)? Can you setup your gear using the hub between the CDJs and the USB3.0 port on your problematic laptop?
Closed due to lack of response.