Survey says?
Comment actions
Post
Follow
[SOLVED] CDJ-2000 - No Audio, except random popping sound
The CDJ2000 appears to function normally, but there is no audio output from the analog outputs, except for some random popping sounds. It will cause the inputs on my DJM800 to spike when the pops occur. I haven't tested the digital outs yet. Will test that next.
Post is closed for comments.
Date
Votes
7 comments
CABLE
Comment actions
Digital selected on analog plug ins.
Comment actions
@Miguel > Did you find the cable to be the problem?
Comment actions
I tested the digital output going into one of the digital inputs on my pioneer DJM800 and it works fine. I'm aware of the digital / analog switch on the back of the mixer, so that's not the case. I've also swapped cables and tested the audio cables on a known working unit. Could it be the audio interface card itself or is the whole system board shot? The fact that the audio works fine on digital tells me that the optical pick up is fine and all I my functions, buttons etc work fine on the CDJ.
Comment actions
@Miguel > I can't honestly answer that, you'd need to contact technical support for an answer.
Comment actions
I suspected that. I suppose no one on this forum has experienced this. In such case, I'd say to close the case. Cherish
Comment actions