[CLOSED] Wego & Tractor 2 pro Gain Volume buttons

Me too.

Here's what I did to work-around this issue...

As I seldom use the sampler, I decided that I would simply map button #4 as a shift button (because the shift button doesn't allow a shift+EQ knob function within Traktor, it adjusts the jog colours instead). Here are the steps I used:

1) Open the settings and go to the Controller Manager

2) Click the Add In... button to create a new input, select Modifier > Modifier #8

3) Click the Learn button and press the SAMPLER button on the left side of the WeGO (so it is illuminated), then press the #4 button

4) Click Learn again and go through the list to find any other entries that are also highlighted orange - delete them one at a time by selecting it and clicking the Delete button. Be sure to go back to the line entry for Modifier #8 between deletions, you don't want to accidentally delete something else

5) Making sure you have Modifier #8 selected, change the Type of Controller **to **Button and the Action to Hold, then change the Set Value to 1

6) Click Add In... and go to Mixer > Gain Adjust

7) Click **Learn **and turn the CH1 HIGH EQ knob on the WeGO

8) Click the Learn **button again and change the **Modifier Conditions to be M8 with a value of 1

9) Change the Assignment **to **Deck A and then click the Soft Takeover button

Close the settings window and you should now find that when you are in SAMPLER mode and you hold the #4 button and turn the HI EQ knob on CH1, the deck A gain will now move!

You can repeat this with the HI EQ knob for CH2 to be for Deck B and you can use the same modifier (or assign the #4 from the right side to also engage M8). If you want to assign deck C and D as well, you'll need to create a modifier for that layer as well, again, for each side if desired, and they can all use M8.

Let me know if that works out for you or if I missed a step (as I typed the instructions after I did it).

This topic has been closed due to inactivity. Should you require future assistance with this issue, please create a new topic describing the problem and provide the URL of this topic as reference.