I just plugged them in and switched them on. But im getting no sound coming out. I've plugged in the red and white AV cables into mater out 2 but no sound is coming out at all. Do I need to use 1 or both of the XLR outputs? I've upgraded from the DDJ-SB and they only required me to use the red and white AV cable to get sound.
The monitor speakers I have only support the red and white av cables I hope i dont have to buy new speakers :/
@Sean > All of the master outputs work simultaneously; you can use both the XLR and RCA connections at the same time, and should you only connect a single output (left OR right), it will still work.
Be sure that you have signal on your channel as well as your master LED meters; adjust the channel gain, channel fader and master volume as required.
Post is closed for comments.
Its weird this morning it worked for some reason. After a night of constantly re-installing the drivers and firmware it would not work. But switching everything off over night seemed to make it work.