When will pioneer update the DJM2000, CDJ2000 drivers for windows 10 (hellow? €7000 useless dj system here)

@fixme12 > @Jay is correct; the current drivers are verified to work with Windows 10.

will re-check the link you sent me, seems something for win 10 's posted 16nov.

if you don't hear me again here, they work fine.

got win10 problem with setting up the djm outputs in traktor

Still need some help, don't know what's going wrong.

I still don't get the setup right for the DJM2000 traktor under windows 10, windows don't get the Pioneer asio driver in traktor for some reason (see screencaps).

If re-installed the driver now 3 times with restart pc without any luck.

all i get is some DJM2000 line left & right connection in traktor.

Where are the usb channels gone to? (usb 1 to 6)

like in this vid https://www.youtube.com/watch?v=pqaXOy_Tzj0 

the setup:

Djm2000  (not nexus) firmware version 3.20

DJM2000 windows driver version 1.300

Traktor Pro version 2.10.0 13

any help? thx

do you have a traktor certified mixer

http://www.native-instruments.com/en/support/knowledge-base/show/2124/traktor-scratch-certified-mixers-for-timecode-control-with-traktor-scratch-pro/

do you see your mixer on the list?


if not get a sound card

@fixme12 > The problem is you're running Traktor in 64bit mode and unfortunately the drivers for the DJM-2000 are only 32bit. Please follow the instructions here to use the 32bit version of Traktor and everything will work properly.

HUH, who's running 32 these days.

it al worked well under windows 7 64 bit, so why not win 10 64 bit.

if this is the solution from pioneer, then it 's really bad as almost nobody is use 32 apps anymore these days.