pioneer still ignore the problem that have been made after the upgrade to 2.00 firmware.
when you use the product with traktor or any midi software, the lights are not activate!
just to know - till version 2.00 everything worked perfect!
it's frustrating.
Sorry, the output LED information has changed and as a result your Traktor mapping for sending the MIDI output data to the XDJ-RX will need to be updated. This is not something that is "broken" but rather a change due to the HID implementation for rekordbox.
Post is closed for comments.
use this and u will be fine ;) http://traktorbible.com/freaks/mappingview.aspx?id=945
Hi, i update my firmware 1.80 to 2.10 and no lights in midi mod.
I test with new mapping for traktor and i have the same problem.
The lights only work in reckordbox and ubs pen.
Pionner please fix this problem =/ .
have u done this setting??? https://www.youtube.com/watch?v=DOEQh9mTppk
Ye i did, http://youtu.be/g484Ho3kIYY
have u set xdj rx mixer mode to midi??
I change to midi mod and work, but my really problem is .... How the hell i will gonna work with the pro djay algoriddim!? Before the update i used very well !!
i put the xdj rx in xdj rx mixer mode to work with all the effects , after the update in mixer mod xdj rx on-line work one ch1 to work with all efects , and in midi mod bye bye effects and the and work the ch1/2 channels.
Any help about this ?
I have the same Problem with FW 2.1. --> NO LED Lights in Mixer-Midi MODE
I use TRAKTOR like a Pro in EXT. Mixing Mode because i will use the original Pio HW Mixer and FX & ColourFX. Traktor should only send 2 Deck Streams to the XDJ-RX.
In this "Cross / HW Mixer" Midi Mode all LED's / VU Meter of the Mixer section are OFF. If set one Deck back to USB Mode it worked again (also on the Traktor Chanel)
Where can i get the FW 1.8 and will there be a FIX in FW2.2 ???
I bought the RX because of the Hybrid Mode (like DDJ-RZ) of HW Mixing and Traktor Software and the Rekordbox Funktion. But Rekordbox is very new a i am a Traktor Specialist.
Pulse,
Is not possible the output LED information are equal for both?
@Filipe > No, since that changed when the firmware was updated to provide HID functionality.