A video would help more than a photo please.
Hi,
I have noticed that when I tempo match tracks, the large scrolling waveform (in the middle of the screen) will come to an end however the small one at the bottom of the screen has the marker in the middle (or somewhere other than the end).
I'm not using sync and have noticed that the memory markers match on the large waveform correctly and the position marker moves past them on the small waveform at the right time.
This can be a bit of an issue if you glance at the screen and don't take it in to account. :)
The unit is running version 2.10 firmware and is new about a week ago.
Below is a picture of the issue. The tune on deck 1 has ended and the memory marker can be seen in the large waveform however in the small waveform the memory marker not in the correct place but is pasted at the same time as in the large waveform. :)
The tune may have had the beat grid halfed from 174 to 87 and them tempo matched to 89. Wouldn't like to be the one doing all the maths for making this work. :D

Is this normal? Is there more detail I can provide?
Thanks,
Matt.
Post is closed for comments.
A video would help more than a photo please.
As you request :) -> https://goo.gl/photos/F7Nq57s81HvX2EqB7
Both of these were taken tonight while messing around. I had been playing for about 20-30min when I first noticed the issue again.
There are two videos with different tracks that show the issue.
Also notice the stuttering of the waveforms which is resolves after a bit of time. This is not an affect of the camera, this is visible with the naked eye also.
Also notice that the tracks are not tempo stretched at all or by much.
I'm play a party this weekend with the same tracks that are in the videos on another RX unit, will keep an eye open for this issue on that unit. Will confirm if this happens on that unit also.
If you want any other videos or information please let me know. I'm getting a little worried I have a faulty unit.
Thanks for your help Pulse. :D
Could you try re-analysing any songs where this occurs (try a handful of them), then re-export to a freshly formatted USB drive and see if the same error occurs?