Hello Again,
Week ago I posted a problem with Rekordbox and drivers. Problem with driver is solved now for DJM 250 mk2, but i got another problem.
My Dell is connected with mixer, and mixer is connected with my gramophones.
When i want to start using control vinyls, there is a problem in section "Control Signal Settings", im pressing Start on gramophone, and i dont see any of "circles" which are showed in manual and also i got info from rekordbox "Error".
Maybe im doing something wrong, please comment in free time :)
Post is closed for comments.
Have you configured the audio device manager for the DJM-250 properly?
These need to be set to Control Tone PHONO, and your rekordbox audio device settings also need to be configured to route the audio in to the right channel.
Yeah i done it before my post.
Gramophone is running, needle is probably on right place, every function on rekordbox about DVS is on like in manual, still there is error.
Audio is configured like in picture above, still is see error.
Can you please post screenshots of your audio device configuration page, showing the device as well as the inputs / outputs, as well as the DVS page?