Official comment
Yes; as you found, you would be better off using the DJM as your audio device and bridge to the CDJs for HID control. Don't aggregate the CDJ audio interfaces unnecessarily!
Comment actions
Post
Follow
CDJ Aggregator Connection issues
- 2 x CDJ 2000 NX2
- 1 x DJM 900 NX2
- Macbook Pro 10.13.3
- Pro DJ link 3 x Ethernet back to Netgear switch - all working.
Trying to follow RB Performance mode set-up for NX2s. Connecting single USB to DJM and hoping to connect to CDJs via USB-Ethernet bridge.
CDJ Aggregator shows Error. Please check your device connection(s) and is not selectable as an output device.
If I plug the USB from the computer to the CDJ directly it appears in the aggregator window dialogue.
I can select DJM-900 device driver as an output device - that works.
When I start up RB both CDJs ask for midi connection confirmation and make the link.
Track collection list is dumped to both CDJ screens but not selectable and other strange behaviour.
Can you please confirm that for full RB performance functionality I should be using CDJ/XDJ aggregator driver as my output device. If so troubleshooting tips as to why CDJs not recognised would be greatly appreciated.
Andy
Post is closed for comments.
Date
Votes
3 comments
Think I may have found the answer here:
https://forums.pioneerdj.com/hc/en-us/community/posts/204159046/comments/115004464746
Nexus 2 ONLY use 1 USB to mixer and DJM 900 NX2 driver NOT CDJ Aggregator.
Continuing to chew through the manual for my newly acquired rig :-)
Comment actions
Thank you Pioneer!
Andy
Comment actions