After the update to 5.4.1, the software lost the connection
to the DJM-900 NX2 several times in the evening. I'll try
again with 5.4.0 and will report if it worked.
Does anyone else have this problem?
Post is closed for comments.
How did you have it connected, and what was "lost"? The audio signal?
Did you have to restart anything or unplug / re-connect?
Were you using any other devices at the time?
What is your computer spec & OS?
- Connection with USB A/B and USB Hub. The connection betwenn USB Port and Computer was lost, so that there was no sound and no MIDI-Control
- In addition, 2 CDJ-2000 NX2 were connected
- MacBook Pro, 2,9GhZ, Intel Core i7, 8GB Ram, OS X Yosemite
We do not recommend connecting a DJM through a hub; please use a direct connection to the USB port on the computer itself. Let us know if this persists when connected directly.
Although I have always operated with an active USB hub
to which the CDJs and the mixer were connected, but I
like to try it directly.
Please try and let us know if that changes. Thanks!