Did anyone have a similar problem with Windows 7 x64 (Updated)
This is a question of a freshly reinstalled HP Elitebook 8560w.
When installing Pioneer Driver-a on the USB 2.0 slot.
After shut down and turning on, it gives a blue screen with the following error "".
And then, after System Repair (returning to the system) windows manages to start. In a situation where the driver is not installed. If installed again, it does the same.
I noticed that this happens only when installing USB 2.0 slots on USB 3.0 slots does not make a problem.
I tried in the control panel to set Default Sound Driver to Windows, but it's not ...
This is typically one of two things...
1) Your Windows system doesn't have all the patches / updates installed -- run the Windows Update to make sure everything available is applied.
2) Your graphics drivers are outdated. Don't update them from the WU alone; get them directly from the manufacturer's site:
Post is closed for comments.
Thanks for the reply!
The solution to the problem was:
1. Reinstallation of Windows.
2. Install drivers from the HP website for the model.
3. Upgrade Windows!