The channels receiving the timecode should be set to the PC input, and on the DJM setting page, select the appropriate option for the type of timecode input:
Comment actions
Post
Follow
Rekordbox dvs with DJM 900nxs & CDJ 2000nxs
HI Guys,
Please help!
Can't seem to get any signal into Rekordbox control signal settings, all i've managed to get is a single line... i've read the instructions multiple time, feel like there a bit vague and not step by step.
Unsure about the input and output setting 900nxs utility, think this might be the issue but i set them how i thought they should be, also where does the bloody wav signal come into things!?
Custom settings? Auto routing?
Mixer version and rekordbox up to date, Usb from Mixer into laptop, Using DVS Trial, Using Rekordbox DVS Vinyl, Concord Digital needle. Downloaded Signal Wav.
Wired
Ch1-CDj1- CD/Line
Ch2-CDJ2- CD/LINE
Ch3- N/A
Ch4- 1210- Phono
What am i doing wrong.
Many Thanks
Post is closed for comments.
Date
Votes
8 comments
Hi Pulse,
I Tried these setting above and it's still the same, Green Line.
By PC You mean change Ch4 over to USB? unsure what you mean.
Also in this image your saying have the CDJs set to timecode?
Cheers, hope we can get this working soon!
Comment actions
Wait, green line? So you are getting HALF of the signal then. Check the RCA cables (if from CD), or the headshell / cartridge wiring (if turntable).
Comment actions
And yes, timecode for the CDJs if you're using them to control rekordbox. If you're just using them for HID control or USB playback, you can ignore those anyhow.
Comment actions
Hi Pulse, got it working now, thinking it was a mixer of both. for some reason dvs is showing up on channel 3 as well, but at least it working now.
I have a link mode via Cat5, set up atm, but of course that doesn't allow me to run the CDJs from rekordbox. Which method would i use to use rekordbox with my CDJs?
Thanks
Comment actions
To use the CDJs as controllers, you'll need to connect them via USB as well, but you don't need to configure them for audio use in that regard. Keep everything else as it is.
Comment actions
Ok Great, good to know! In one of your comments you mentioned 'Timecode for the CDJs if you're using them to control rekordbox' What did you mean by this?
Comment actions
Older CDJs which don't have USB can still be used the same way a turntable is; a timecode signal is played to use as DVS input to rekordbox to control the deck.
Comment actions