Have a feature request or suggestion? Post your idea here!

Post

2 followers Follow
0
Avatar

Lighting Fixture Request: Xiang Yi Lighting / STL1003 Update

Hi,

I'm not sure if this is the proper way to request such change but in the previous post here:

https://forums.pioneerdj.com/hc/en-us/community/posts/4408265100057-Lighting-Fixture-Request-Xiang-Yi-Lighting-STL1003-Moving-Laser-Heads

The way the fixture was done perfectly reflected the DMX channels but does not allow me to reassign it to other Fixture roles because of Channel 1 being assigned as a Pan Rotation. Consequently, when assigned as an Effect 1, Effect 2 or Laser role, the moving head spins non stop on the Pan axis. 

By having the Tilt/Pan channels mapped independently, I'll be able to create a more wide array of alternative use of these moving heads (which are an hybrid between spot moving heads and lasers).

Thank you so much! 

Here is the fixture update request:

Fixture1:

Manufacturer: Generic
Name: Generic Moving Laser 8bit
Type : Moving Head
DMX mapping:

Aisle/Channel ID Range of variables Description
CH1 0 255 X-Axis position control ; Equivalent to Pan 8bit 
CH2 0 255 Y-Axis position control ; Equivalent to Tilt 8bit 

 

Fixture2:
Manufacturer: Unknown
Name: STL1003 Laser 
Type : Moving Head
DMX mapping:

Aisle/Channel ID Range of variables Description
CH1 0 255 Pattern control ; Doesn't do anything can be used as dummy channel
CH2 0 255 Motor speed control, from fast to slow
CH3 0 255 Total dimming/laser intensity
CH4 0 255 Red color
CH5 0 255 Green color
CH6 0 255 Blue color
CH7 0 0 Strobe off
1 255 Strobe from slow to fast
CH8 0 50 Channel 1 to 10 are valid
51 100 Self-propelled mode 1
101 150 Self-propelled mode 2
151 200 Voice control mode 1
201 255 Voice control mode 1
CH9 0 255 Speed corresponding to the self-propelled mode
CH10 0 199 No effects; it's just to control channel 1 to 9
200 255 Reset the device for 5 seconds



Thank you so much for the amazing product support.
Frank

Frank Halfwong Not planned

Official comment

Avatar

Hello Frank,

Firstly, the Fixture 1 (Generic Moving Laser 8bit, Moving Head) has not been included in the fixture library so that you cannot use it with the Fixture 2 (STL1003 Laser, Moving Head). If you want to use Fixture 1 with the Fixture 2, please request it in the Forum page below. 

https://forums.pioneerdj.com/hc/en-us/community/topics/115000046523-Lighting-Fixture-Request

Secondly, the Fixture 2 does not work as you described. Please see the rekordbox lighting library as shown below. Each channel works in the ways below. Also, the channels with (*2) cannot be controlled with rekordbox lighting. This is how your fixture works with rekordbox lighting app.

Thank you for your kind understanding. 

Pioneer DJ Support

Keiko
Comment actions Permalink

Please sign in to leave a comment.

1 comment