Color error Eurolite S-20 Simulator

We have updated the fixture in the AtlaBase library. It will be reflected in the next rekordbox fixture library update. Please find the latest update of the fixture library here.

On behalf of Pioneer DJ,
AtlaBase Ltd

Hi Atlabase team,

I have to come back to the color errors of the recordbox control of the Eurolite S-20. I installed the latest version of the fixture library, removed the S-20 fixture and then installed the new 13 channel fixture for the S-20.

Unfortunately, the random color selection still happens.

To get the correct colors, the following DMX values ​​must be sent for channel 3:

• For white, value 0 to 3
• For blue value 8 to 11
• For orange value 16 to 19
• For cyan value 23 to 26
• For magenta value 31-34
• For green value 39-41
• For red value 47-49
• For purple value 55-57
• For yellow value 62-64

Perhaps it is also necessary to program a "Recordbox is ready" fixture version. But you know that better.

At the moment it makes no sense to use the Eurolite S-20 with recordbox, because this random color selection disturbs the entire light show.

Could you correct the problem, please?

Thanks a lot for this.

Jost

Your lighting fixture has been updated and will be reflected in the next rekordbox fixture library update. Please find the latest update of the fixture library here. 

On behalf of Pioneer DJ, 
AtlaBase Ltd 

Hi Atlabase team,

I have to come back to the color errors of the recordbox control of the Eurolite S-20.

I installed the latest version of the fixture library, removed the S-20 fixture and then installed the new 13 channel fixture for the S-20.

Unfortunately, the problem is still the same. The colors are chosen at random.

If I use the DMX Direct controll function of Rekordbox to specify a color via channel 3 with a value, the correct color comes.

Apparently there is still a problem with your lighting fixture for the Eurolite S-20. Of course, I don't know if you can change that. But it would be nice if you would try again.

Many thanks for your help.

Jost

Hi Atlabase team,

I come back to the color errors of the recordbox control of the Eurolite S-20.

If no strobe function is enabled, the correct colors are now displayed. That is very good. Unfortunately, however, the error now occurs with the strobe function activated. Here the colors are chosen again arbitrarily.

Do you have an explanation for this phenomenon? Of course, it would be nice if you can also solve this problem and the same color is displayed in the strobe function.

Thank you for your efforts

Jost