Me too. I came here for same reason. Bought DDJ SR. I've done everything. The unit responds with Serato DJ on screen. NO SOUND.
I just picked up today everthing is all set drivers firmware no sound from my dell laptop or my ev speakers need help and fast
Cette publication n’accepte pas de commentaire.
@Terry > Sorry for missing this, hopefully you're receiving notifications and will comment back if you're still having issues.
@photom2 > Have you verified that your gain stages are all up?
1) Play a track in Serato DJ on the deck 1
2) Flip the "LEVEL" switch to CH1/2 - you should see signal on the channel meter
3) Take the channel fader to the top, cross fader to the left
4) Flip the "LEVEL" switch to MASTER
5) Adjust the MASTER LEVEL knob to show signal on the meters
6) Check your output device (speakers, etc).
Let me know if that helps.
Thank you Pulse it works now firmware was the problem needed update. Hi ! photom2 ! i did get it to work first make sure your DDJ-SR firmware is update (v.1.07) then turn on the FX channel or all of them also you can turn on the tap with beats above jog wheel to, Note you must have the pad plus turned on then you should be all set, This video from youtube will help it helped me out big time. If you are still having problem let me know. https://www.youtube.com/watch?v=6V0Cexozzpo
also here is the manual http://www.pioneerelectronics.com/StaticFiles/Manuals/DJ/DDJ-SR_OperatingInstructions100213.pdf
Your quote: Have you verified that your gain stages are all up?.........I have just bought this unit so don't know what 'Gain Stages' are.
Also, you say, "have I checked the 'Output and Speakers" I know it is strange but I don't have speakers. Do you have to have these plugged in for the sound to work? I have been using only the headphones as I am sending the unit to Africa where they have large speakers over there.
Also on my new Mac (latest) in 'Sound' I converted everything to output 'DDJ SR'. A message said, "No Sound output"
The Mac Book is running Serato DJ and the jog wheels work and I can start, and stop. I can negotiate around the music files and load them. Everything
is working except sound. Do unit all come with sound card. As I have seen when they are advertised, they say, "With Sound card>"
@Terry > Glad to hear it!
@photom2 > The gain stages are, in this order:
channel gain within the software
channel gain / trim on the hardware
If you have any of those down, the audio signal stops at that point. Many first-time users don't know about the channel gain on the hardware and wonder why there is no sound.
If you are without speakers (output), and you're wondering why you can't hear anything in your headphones, you may need to select the channel CUE (red button above the channel fader) in order to preview that channel.
Yes, it has a sound card.
Good morning I have a problem with my mid pionner ddj sr ... when I step cue side A side B it works ... I have done firmware 1.7.0 ... anything else and flashes its lights .... after a few minutes discontrola all peopl .... please help ... pioneer not already know what I can do....
<SNIP> Removed personal information. </SNIP>
@Ayron > I'm not sure I understand what the problem is, could you describe what you're doing, what software / operating system you're using it with, and if possible, post a video?
Pulse that is your video what my Mr. pionner to do this ... says something then if you have any solution in tou ... more mozambique can give me some tips .... <SNIP>
@Ayron > The problem you're experiencing is that you're pressing |< which is the "jump to start of track" OR "jump to previous track," but as you're already at the start, the function would be "previous" -- but with no previous track, it's a software glitch, nothing more.
Load a few tracks and it should behave normally.
pulse can explain to me how I can do and that version can use ...please....
@Ayron > I'm sorry, I'm not sure what you're asking. I'm guessing those weren't your videos that you posted, but if you're having the same problem as the first video, the problem is you haven't loaded more than one track.
My suggestion is you check that you are also using the latest version of Serato DJ.
Yes friend I tou to use the latest version of serato dj 1.7.4 ... ja expremeitei with virtual dj traktor and nothing remains to do
@Ayron > Again, I'm sorry but I don't understand what you're asking - could you please try typing in your native language and I'll see if Google Translate can make a bit more sense of it.
bom dia pulse eu meu problema e que eu quando tou a tocar piso a tecla cue do deck A ela funciona com o deck B depois ela fica totalmente descontrolada fica a piscar as luzes o que eu quero e que me ajude como eu resolver esse problema porque eu sou eu que tenho esse problema eu tava a ver na net sao muitos entao isso e um erro da pioneer ou firmware nao e compatible com o mid ....pesso ajuda amigo por favor
@Ayran > Sorry, there is clearly some information being lost in translation. Can you please list out step by step what you are doing and then what happens vs. what you expect to happen?
DECK A: Press PLAY, song plays
DECK B: Press PLAY, song does not play; play button flashes, software does not play music
pulse o problema que o mid esta a fazer e quando eu tou a tocar depois de alguns minutos eu piso o cue deck A ela toca tambem a musica de deck B e
agora outro problema e fica toltalmente descontrolada basta eu pisar qualquer butao ele pisa outros butoes
@Ayran > Unfortunately there is a language barrier that prevents me from understanding the issue you're having and being able to provide assistance. ** Please contact Pioneer support in your region** for further help.
bom dia pulse...eu buy liceced serato dj full so agora nao consigo ,ele activa e nao reconhece nenhum controler pesso ajuda...quando eu acesso o meu email email@example.com ele activava e depois funcionava qualquer controler mais agora ja nao aceita nenhum...
o sistema operativo que tou a usar mac os x maveriks 10.9
processador 2.5ghz e ram 10gb.
Cd virtual limited edition DDJ-WEGO2
Pulse my virtual dj cd limited edition broke up and I do not have copies of that CD to install you can send me the link to download the software please ...
@Ayron > Pioneer is unable to provide replacement software, if you registered your account with Atomix (Virtual DJ) you can still download a copy from their website.
I've just bought the Ddj sr, and every time I use it, after a while the sound cuts out of the master out then I have nothing at all, I have downloaded and re-installed the latest Asio Driver and I am currently using it with the latest version of Rekordbox Dj, when I run Serato Dj the sound output is fine with no issues at all, I also have a Ddj sx2 which is faultless and runs perfect, I have recently changed to Rekordbox Dj from Serato and I am relatively happy with it, but there is something wrong with the Asio driver software compatibility with Rekordbox Dj , and the Ddj sr,
please advise - thanks.
@Adrian > Are you possibly running Windows 10?
Now I can see the issues that are being highlighted, unfortunately I have sent the item back for repair, is the DDJ RX affected?,as I might go for that instead,
Most units, but updated drivers are being rolled-out as quickly as possible.
No Updated Drivers launched for the DDJ SR yet??
Every other unit supported - why is this?
Windows 10 Driver updates
- DJ applications running on certain versions of Windows 10 did not detect Pioneer DJ equipment.
Fixed My DDJ-SR, no sound problem, it was the brand of USB cable that I was using, it worked ok for everything else except - sound!! it looks like that the SR is sensitive to communication carried from my P.C to the unit, Belkin cables were especially poor yet they are one of the market leaders? purchased 2 high quality cables off the internet, and now ok, with no issues at all !!!
I purchased a DDJ-SR, in September 2016 and in May 2017 the left channel fader when push up on the controller drops on the laptop, I'm using Virtual Dj. The software is up to date on the DDJ-SR.
@Curtis > Does it work properly when using Serato DJ?
I think pioneer should do a product recall on the ddj sr coz more people are getting the same issue, same with car company if they think it unsafe to drive my cause death on controller may lost thier job coz a fail controller