Survey says?
Actions pour les commentaires
Publication
S’abonner
[SOLVED] CDJ-2000 - No Audio, except random popping sound
The CDJ2000 appears to function normally, but there is no audio output from the analog outputs, except for some random popping sounds. It will cause the inputs on my DJM800 to spike when the pops occur. I haven't tested the digital outs yet. Will test that next.
Cette publication n’accepte pas de commentaire.
Date
Votes
7 commentaires
CABLE
Actions pour les commentaires
Digital selected on analog plug ins.
Actions pour les commentaires
@Miguel > Did you find the cable to be the problem?
Actions pour les commentaires
I tested the digital output going into one of the digital inputs on my pioneer DJM800 and it works fine. I'm aware of the digital / analog switch on the back of the mixer, so that's not the case. I've also swapped cables and tested the audio cables on a known working unit. Could it be the audio interface card itself or is the whole system board shot? The fact that the audio works fine on digital tells me that the optical pick up is fine and all I my functions, buttons etc work fine on the CDJ.
Actions pour les commentaires
@Miguel > I can't honestly answer that, you'd need to contact technical support for an answer.
Actions pour les commentaires
I suspected that. I suppose no one on this forum has experienced this. In such case, I'd say to close the case. Cherish
Actions pour les commentaires