I have also tried moving the inputs around. Only Channel 2 on USB 3/4 works. Channels 1, 3, and 4 are all the same result. No audio into the Mac
Issues getting audio into a computer via DJM900NXS and the DJM-900nexus Settings Utility
So I am trying to record from my DJM-900 into my Mac. I have everything setup and am using channels 2 & 3 on the DJM.
Channel 2 is routed through "USB 3/4" and Channel 3 is routed through "USB 5/6".
Channel 2 is both sending and receiving audio as it plays from my monitor speakers and I can see signal on my Mac. Channel 3 (USB 5/6) plays on my monitors, the CDJ and everything works as normal, but no audio into the Mac.
I know this works because I've done it a couple years ago on this machine. But this time I have been at it for a couple hours and no results.
Any help or advice are much appreciated.
Accedi per aggiungere un commento.
Azioni per commenti