Have a feature request or suggestion? Post your idea here!

Post

2 follower Segui
0
Avatar

DJM-800, dead master out. HELP!

I have a DJM-800 with a problem, the levels show sound on both the channels and the master but there is no sound out on either master out or booth. But i have sound out on the rec?

 

Anyone hade this problem before?

Fredrik Thörn

Il post è chiuso ai commenti.

Data Voti

6 commenti

0
Avatar

did you try both the RCA master out and the XLR master out?

john.walsh 0 voti
Azioni per commenti Permalink
0
Avatar

Both the RCA and XLR are dead, did test the rec RCA today again and its dead to.

So at the moment the only place there is sound is trough the headphones

Fredrik Thörn 0 voti
Azioni per commenti Permalink
0
Avatar

@Fredrik > If you've tried swapping all the cables and you are getting a signal on the VU meter then I would say you need to bring your mixer in for a repair. What are you running the mixer into? Are you sure there isn't an issue with something further down the digital chain like an amp perhaps?

Gavin 0 voti
Azioni per commenti Permalink
0
Avatar

I've tried in into both an amp and in 4 diffrent active speakers, guess i will have to give up. Did tear i appart but couldn't find anything.

Fredrik Thörn 0 voti
Azioni per commenti Permalink
0
Avatar

Ok then I would say you need to contact technical support in your area - the links are on the right >>

Gavin 0 voti
Azioni per commenti Permalink