Seagate Backup Plus Slim 3.0 not running on CDJ 2000

Is it formatted as FAT32?

Alexsandro,

I am 90% sure that I know your problem and that's because of the power consumption your harddrive is asking for. I had a WD My Passport HDD of 1 TB and it gave me an usb error on the CDJ 2000 nexus. Everything was set up as it was supposed to be, but kept saying usb error. 

Than I bought a Samsung 500GB T3 SSD and everything worked fine.

This is probobly because of the lower power needs of an SSD. A HDD needs power to spin the disks and for a laser. A SSD doesn't need this. 

I hope I could help you and many others with this problem. I read a lot on the internet about this problem.

Hey guys, I got really confused about all this. 

Apparently Seagate drivers should be the "best" to run on the Pioneer devices however its not happening. 

I think you might be right, about it. I have read a the same issue on other forums. 
Lets spend some extra bucks to get another driver now hauaauauha. Damn.

Thanks for your help!

I would really recommend that man. It's double the money and half the capacity of the drive (In my case though), but you will get a much better experience using a large drive, with a HDD compared to a SSD. 

By the way, another advantage of using a SSD is the fast exporting and reading times on Rekordbox and CDJ's. 

I can only recommend it and I hope your problem will be solved by this!

If the drive accepts an additional power source, using one may solve this issue.