Hi. I recently installed Rekordbox 4.0 and am trying the new 30-day performance mode. I found that there is a lag in response time between my CDJs and the software. I can't really scratch because the software is not picking up my movements as quickly as it should. Maybe I don't have it connected correctly? I'm using a CDJ-2000NXS, CDJ-900NXS, and a DJM-900NXS, connected via USB to a MacBook Pro 13" (late 2013). I typically use a LAN and load tracks directly down to the controllers, which gives me instant response between the waveform and the jog wheel.
Would take any suggestions out there.
Thanks.
Publicação fechada para comentários.
@James > It depends a bit on what your audio latency (buffer) setting is at - the higher the number, the more likely there will be lag.
The reason there is no latency with the LINK mode is the player has the audio buffered on the player itself, rather than having to send control signals over USB to the software.
I think my buffer setting was at 512. I'll try messing with it and see what happens.
Thanks for responding.
@James > You want to set it as low as possible without getting any noticeable audio pops or clicks. 512 is just a default value, you may be able to get it as low as 64 or 128 depending on your system.