Are you talking about over the master output?

ok when i speak via microphone normal its ok, but when i try do some fx at microhpone channel microphone is blocked and i dont hear naything from speakers, when i change back jog wchich i choose channel to do fx, for example channel 1 (deck 1) its workin well, and microphone working

Are your speakers connected to the master or booth output?

master, 

i fix it !!! :)install one mor eine soft to ddj 1000 and once again reinstall rekordbox and everything work great, thanks for support, post/topic to close, thanks pioneer :)

Boa tarde. Eu uso o controlador DDJ 1000, com os sistemas mais atualizados: Firmware 1.06 e a mais atual rekord box. O problema é que o controlador, em qualquer uma das conexões, quando usa o microfone, o som fica distorcido, mesmo com o volume de graves, agudos e o volume total de micron baixado em 0db. Um detalhe, é que quando adquiri o controlador, ddj 1000, este veio com o firmware em 1.04. Naquele momento, o microfone tinha um áudio perfeito. Então eu atualizei o firmware para aversão 1.05, o áudio do microfone também foi perfeito. Uma semana após a atualização para o firmware 1.05, o áudio do microfone ficou todo distorcido e ainda soando e 0 db no controle de volume do microfone. Agora, com o firmware atualizado para a versão 1.06, o som do microfone ainda permanece distorcido. Lembrando que quando ainda estava no firmware 1.04, o som do microfone estava ótimo e agora, péssimo. O que fazer?

• Good afternoon. I use the DDJ 1000 controller, with the most up-to-date systems: Firmware 1.06 and the most current rekord box. The problem is that the controller, in any of the connections, when using the microphone, the sound is distorted, even with the volume of bass, treble, and the overall microne volume lowered by 0db. One detail, is that when I acquired the controller, ddj 1000, this came with the firmware at 1.04. At that moment the microphone had perfect audio. Then I upgraded the firmware to 1.05 aversion, the microphone audio was also perfect. One week after upgrading to firmware 1.05, the audio of the microphone got all distorted and still sounding and 0 db in the volume control of the microphone. Now, with the firmware upgraded to version 1.06, the sound of the microphone still remains distorted. Remembering that when it was still in firmware 1.04, the microphone sound was great and now, lousy. What to do?

@Nando > Does the distortion occur when using both mic 1 and mic 2 inputs?

@Nando > We can't resolve the issue until we identify what it is. So far, you're the first (and only) one complaining about distortion.

What kind of microphone are you using?

O modelo de microfone que uso é:

CSR MICROPHONE

HT-58 A - MICROFONE DINÂMICO UNIDIRECIONAL

IMPEDÂNCIA: 600 ohms

Sensibilidade: -74db +/- 3db

Resposta de Freqüência: 15hz ~ 12,5khz

• Não seria possível reverter o firmware de 1.06 para 1.04? Porque quando estava na versão 1.0.4, o microfone estava funcionando perfeitamente. Quando você coloca uma nova atualização de firmware, você tira o antigo ... e fica muito complicado. Não é possível reverter, instalar atualizações de firmware antigas?

• Would not it be possible to revert the firmware from 1.06 to 1.04? Because when it was in version 1.0.4, the microphone was working perfectly. When you put a new firmware update, you take out the old .. and it gets very complicated. Can not revert, install old firmware updates?

Have you tried using a different microphone or mic cable?

• I already explained that I have 4 microphones, two wired and two wireless. The 4 have already been tested! ???????????????????

You only noted one microphone (above), and didn't tell me if it was the same cable for other tests or not. I'm trying to provide as much information for our product team as possible, so I thank you for answering my questions.