my cdjs 2000nxs2 does come up in rekordbox, please I'm begging for help. I've followed your old directions, where I reboot my laptop, open up utility settings for the audio output but still nothing works. using a "Mac Pro MACSO Mojave" late 2013 (I should mention I'm new to DJing)
@Wander > You may have missed this portion of the driver installation steps to disable the driver security in the Mojave OS; to get this to come up again, either try over-installing the drivers, or use the uninstallation tool from the driver package to remove them, then install fresh.
Publicação fechada para comentários.
When you use USB to connect the CDJ's, DJM and Mac, you need a USB hub in the first place, to connect the CDJ's and DJM on to. But I suppose you will have already fixed this. The fixed USB cable from the USB hub goes in to your Mac. Then you start up RB and select Preformance Mode. After this you push the 'Link' button on the upper left part of both CDJ's. Then the display will ask to confirm, push the Rotary button, and select what deck is which number. 1 and 2, or 2 and 3. (I forgot). And the 2 corresponding DJM inputs must be set to USB.
After this you select a music file in RB, drag this to the deck of choice, and your CDJ will repond by putting it in CUE. In the top menu of RB you select 'Record' and the VU meter will appear. Next to the VU meter you'll see the red "Record" button.
If you want to mix in Export modus what is mostly done with CDJ's, then you have to wire all hardware in LAN/RJ45 cabling with a LAN switch, push the 'Recordbox' button on the CDJ's, and change to Line input analogue or digital on your DJM.
(I wrote this without any Pioneer hardware near, so I might've missed a small part.)