I am not able to control anything on rekordbox after following the guide on how to control rekordbox using MIDI.
I see on my RX display everything white and mode is in midi controller, but when i want to control rekordbox nothing happens.
what am i missing... under audio i dont see my device information for de midi xdj rx..
@Ricardo > Sorry, the audio issues are likely a limitation of your computer not being capable of handling the audio processing at the latency you've chosen. You can either try increasing the latency or you'll have to come up with a different solution.
My recommendation would be to run the analog route; take the master output from the RX into your Presonus inputs and then monitor the input to your speakers.
Publicação fechada para comentários.
Ok now i was able to get this fixed, but now i have problems with the audio I use ta presonus interface audiobox... i dont know how to setup the asio 4 all to listen in my speakers and on my headphones the cue track .. any ideas?
i did what you said on a youtube video pulse...
i do the A4A and it sounds horrible and goes back automatically to the asio one
also it sounds with static on my headphones
Pulse I find it impossible that my desktop is not able to handle such latency. I run Ableton live 10 with a lot of plugs instead and I get no issues.
How i have the set up is:
From presonus to audio monitors it's connected
Presonus obviously to the desktop
RX to the PC using USB cable
I choose A4A I activate under it presonus I/O and then also the one label RX Asio the late cu is at 1024 and inside rekorbox I choose that also A4A and latency under 1024 I tried different combinations and clipping audio and by itself it changes to the XDj Rx Asio in rekorbox.
My question would be do you know why this is happening and if there under a a solution?
Do you know a good combinations on the buffer?
With you suggestion if I understood correctly would be to connect the RX directly to audio monitors and presonus leave as is???
Well, you didn't give me any details about your computer spec, so that was speculation.
Again, this is not a standard configuration and unfortunately we can't provide any official support for not only ASIO4ALL as a 3rd party software, but the Presonus interface as 3rd party hardware.
So this way is only intended to work with the windows audio card as you show in the video ?
I can give you specs but they are above average.
Can you explain how would it work as in the video?
And I think you just didn't answer the question on how to connect kind of the way you suggested I guess i didn't understand how to do your suggestion. That's why I gave you how I have it connected right now
The intended way to use rekordbox is with a Pioneer DJ device to act as the audio interface.
Any video or instructions I produce to provide alternative configurations are not officially endorsed; I do so on my own to try and teach users how to figure them out on their own.
No two computers or configurations are the same, and while I may be able to get something working on my computer doesn't mean you'll be able to replicate it with the same degree of success on yours.
Learn from my instructions and adapt them for your own needs, but I'm sorry, I can't provide any official support to your configuration.
Pulse
I do understand what your are saying. Guess needs more trial and error. Oh well it was worth the shot. I don't use it like this I use it with the link. Just wanted a taste of the performance mode
Sorry - it's just impossible to try and kludge together many of those alternative configurations and have an optimal performance.