XDJ-XZ and RMX-1000

Hello,

I have an XDJ-XZ and an RMX-1000.
Apparently, the XDJ-XZ has SEND / RETURN connectors.
How can I connect them using the SEND / RETURN connector?
For the send, it's OK but I don't see for the Return!
Thanks a lot for your help !

Regards,

Pascal.

Prokuniev 17 de Dezembro de 2019 22:16 Respondido

Comentário oficial

The SEND on the XZ is intended for use with a DDJ-1000 or SP-16 for sampler use, and the return would be routed to one of the channel inputs. We don't recommend using an EFX or RMX unit with the SEND and returning it to an input channel as that would potentially create a feedback loop (if you were sending the master signal). Instead, we suggest connecting the RMX in series with the master output from the XZ to the input on the RMX, then output from the RMX to your speakers or recording device.

Pulse 18 de Dezembro de 2019 16:44

Publicação fechada para comentários.

Data Votos

7 comentários

Hello Pulse,

Thank you for your reply and for the information !

Regards,

Pascal.

Prokuniev 19 de Dezembro de 2019 19:07 0 votos

This is not fun...so if I'm playing a show on the xdj I now only get the RMX effects on the master out and not the booth with this configuration :(

CHRS ROZE 21 de Maio de 2020 03:37 0 votos

@Chris > Sorry, but without a send/return, there's no option to "insert" the RMX effects anywhere unless it's between an external source like a CDJ before it's connected to one of the line inputs on the XDJ.

Pulse 21 de Maio de 2020 16:49 0 votos

Such a shame pioneer!!!

Carels J 9 de Fevereiro de 2021 21:33 0 votos

Hi,

can we take the outs from both the XDJ-XZ and the RMX-1000 into an external mixer then from the mixer to the speakers?

would that solve the issue of the feedback loop?

|S|A|R|M|A|D| 2 de Novembro de 2021 12:07 1 voto

This is the most frustratingly idiotic design issue with the XZ. You put a send function with no return? Seriously? Master out only? Which, BTW, takes XLR out of the picture entirely, not to mention applying effects to the entire mix rather than for, idk, transitions??. When I bought an RMX and went to connect it to my XZ, I couldn't believe my eyes. It went back within 24 hrs. Unbelievable.

Ryan Zwicker 10 de Junho de 2022 07:10 1 voto