DDJ-200 headphone cue through master

https://www.youtube.com/watch?v=ZTfDmuE7w6w

Hi, Yes have split audio set up and still having the same issues. I have also tried changing the headphone and speaker connections around on the splitter lead. Whenever a channel is selected to cue to the headphones, you get fader bleed coming through to the master, this is particularly noticeable if you are rewinding the track via the jog wheels. any other suggestions?

Hi mate did you solve this?

Hi mate, 

Short answer no! curiously anything that is recorded is clean and does not have the fader bleed from other track, absolutely nothing back from Pioneer on this point nor any update to the app for Android which is frustrating, not good for playing live but as i say playback from recordings is fine 

If the split is not 100% clean, it could be due to either the audio output not perfectly isolating each channel (there may be audio processing mixing them together for a widened stereo image, for example), or the headphone jack of your Android device is not properly making contact with the rings of the output splitter due to its TRRS configuration whereas the splitter is TRS. One of the contacts may be mis-aligned and contacting two points on the splitter.

Man, thank you so much, didn't realise i had dolby atmos on messing with the audio processing, it's fixed, nice one :D

Aha! Good find. Glad you got that sorted!

I'm having the same issue on my s20+. Bought a OTG cable, all commands are working fine, but headphones and master are mixed on the speakers.

I've already turned off all dolby options. Is there other configuration that is important to check?

I have a Wego3, and the headphones are also not working.

(seems like a split audio problem)

Tks in advance!

@Alexandre > Try a YouTube video like this; if the splitter successfully splits the audio to each of the outputs with no bleed-through, then the phone and cable are working properly so it's a matter of checking your DJ application to verify that the setting is set to split.

If, however, you hear any of the audio bleeding through, the splitter or your device's audio settings are what you need to check. 

Yep, Left and right are working fine. 

I've tryed Djay 2 and wedj, both had the same problem:

- No headphone Signal on the wedj3;

- Master (RCA) leaking headphones.

My phone is a S20+, with no native audio jack.

I am using an original Samsung OTG adapter to connect wego3 with the original wego3 power source.

Is there a possibility that wego3 is not recognized as a 4-channel controller in Android?