What is the mixer/audio interface you're using?
Ações de comentário
Publicação
Seguir
DVS Troubleshooting Assistance Needed
My Reloop 8000 MK2's arrived today. I got everything wired up properly and installed Rekordbox 6 due to 5.8.5 being a system crashing shit show.
DVS functionality is active, but when I attempt to calibrate nothing shows up. Audio is exported just fine from decks 1 and 2. Zero audio from the Reloops.
Caveat 1: I can hear audio from a regular record via the headphones. I can also hear the tone from the control vinyl. It's just not being exported through the USB output to my speakers for some reason.
Caveat 2: My Input Utility has zero options. Other people have posted screenshots with phono specific options that can be selected. I called Pioneer DJ Support. I got an old woman around 75 who didn't know what I was talking about who called it "Reekord-Box". She sent me a link to a pdf that's dead and doesnt load.
I've scoured YouTube and online manuals and found nothing. Obviously this is a driver/software related issue. Anyone know what I'm missing here?
Publicação fechada para comentários.
Data
Votos
4 comentários
Pioneer DDJ-1000 Rekordbox version, running 1.07 firmware and the latest version 6.
Ações de comentário
I just reconfigured the rca's to line output from phono, and changed the selector switches to line with the same result. And a minute ago I received an "error opening DDJ-1000 ASIO" error and gave up. A great day getting new tables ends horribly. I'll try another reboot, and check the ASIO and go from there. Pretty much exhausted all options.
Ações de comentário
Sorry for the delay in getting back to you - it's been a crazy couple of weeks since the rekordbox 6 launch.
With rekordbox 6, you will need a subscription to the Core or Creative plan for DVS functionality (or the free trial). Once you have that going, configuring the DVS is easy.
Set the input switch on the back to PHONO and the channel input selector to USB A (to match your computer connection). Then in the DVS panel, you check the box at the top of the DVS window to enable it, and with a control tone playing from the rekordbox vinyl, you should see the green signal lines appear in the calibration scopes. If they aren't there, try adjusting the size slider way in and way out; sometimes it's so large it's off-scope.
As for the ASIO error, you may need to reboot or reinstall the drivers if selecting the device again doesn't allow it to be set as the chosen interface.
Let us know how far you get.
Ações de comentário