Are you using the RMX with a DJM mixer that has send/returns? If so, you must make sure the send/return is engaged.
RMX-1000 - jumping level on Isolate Fx section
On my rmx-1000 i am detect bug - if all 3 knobs (isolate fx) on default (vertical) position and if we enabling any of isolate fx (for example transe\roll) - sounds not changing BUT sound indication level increases on 1-2 db.
Looks like this is firmware bug.
Post is closed for comments.
Rmx works and all effects applies. But level indicator jumps when nothing changes in sound.
The level indicator will always be activate if the RMX is receiving/sending audio, regardless of whether or not you are applying effects.
I'm not sure I understand what the problem is. Please post a video in DropBox or a non-public video on YouTube and share the link here.
Sorry, maybe my english bad :)
Here i am recorded video: https://www.youtube.com/watch?v=TWVsj00LWsE
note: in same time ears not detects changing of level.
@Burzhuy > While this instruction set was written for the EFX-1000, the same details apply to the RMX-1000; chances are you simply need to turn the output knob down from its current position. There is no need to have them both at the same position (12 o'clock); you just need to have them so the levels match with no effect parameters engaged.