[CLOSED] XDJ-R1 1.09 Not all right

http://www.youtube.com/watch?v=Blkd9SIscIo

I have got the xdj r1 now for a month, but the firmware 1.09 gives problems with bpm counting.

For example: after loading it is 135 bpm, than a few seconds later it jumps to 134 bpm, I correct it with the pitch to 135, and then even later it shows 136 bpm. It must be 135 bpm, so the bpm counter doensn't work properly.

I want a sollution and version 1.10 !!! This makes me sad, it costs a lot of money to buy.

Sorry for bad english, I am a dutchman :-)

Hi Guy's

Fixed my XDJ R-1 Instability by changing the Wireless WLAN Settings from "AUTO" to CH1 

Repost on other forums if this works for you please,

           Thanks,

Wlan changing...Nope, doesn't work for me. Sorry!

Who can explain why the bpm counting changes several times bij playing cd's?

Is this a problem by working with cd's or is it a problem of the electronics of the xdj r1?

Thanks

Nick van Strassen and all the others with bpm issues please understand something: your xdj-r1 analyse the music every X seconds during X seconds. Let's say that every

30s xdj analyse the track during 10s. It's normal that if on the first analyse it gets a beat it shows you 128bpm (or whatever bpm) but if during an analysis the music has a break and there's no beat, xdj-r1 does its best and give you a different result.

Do not mix based on bpm.

Perhaps other pioneer devices make 1 analysis for each track and display always the same bpm during all track. But from my understanding the xdj-r1 makes several analysis during a play (and I'm thankful for it, because if my rhythm changes to reggaeton I would like to know the current bpm)

Many thanks to explain me how the xdj does his analysis. The bpm counter is ok and I understand it.

Thanks.

what problems are fixed changin the WLAN configuration? the stability or the instability?

I still have the issue with my right fader that my dealer will not acknowledge and the problem of when master tempo is switched on, any touch of the jog wheels it will literally skip seconds worth of music.

Not very good when your live in the mix at all!

just an FYI: FW 1.10 came out today

Hi, so, some feedback about bpm issue. I ve been contacted from Pioneer and i spoke wiht one of their dj explained the bpm changing problem. I tested two deephouse tracks(the same song on deck 1 and 2) and did notice any bpm jump back or whatever.. but playing other kind of music, like 70's bpm are always in change..so i assuem that it s quite annoying to follow and split and move jogwheel continuosly .. why did not gave us a choice to anailze ont time or continusly the bpm? Fonger crossed on verison 1.10 . I will read carefully what changes have been done on it before installing it.. ciao 

Sorry i wrote wrongly .. " tested two deephouse tracks(the same song on deck 1 and 2) and did NOT notice any bpm jump back or whatever"

Hi Gustavo,

Sorry this did not work either, totally crashed last night while playing a gig, so bad that even my Virtual Dj would not load,  looked like it had a cardiac arrest, not a happy bunny at all :-(

Still following this. And still disappointed that it hasn't been fixed. I settled on a numark ns7 in the meantime while this is resolved. Motorized platters are pretty awesome too btw. Just saying.

I discovered, that the bpm issue happens only with usb (i only use mp3s, I don't know whether it happens with wavs too). The bpms 90 of 100 times are correct if I use cd with mostly house tracks (I only use audio cds).

Last weekend at a party my XDJR1 froze. (ver 1.09)

I put a recorded CD on the right deck, and tried to play one of the last tracks, it started playing for about 10 sec and after that it stopped, and it didn’t played it after that. I ejected the cd, and discovered that there were some "holes" on the inner side of the disc. (After that, I started recording the video.) I don't get it why it didn't play the last track, whilst the holes should only affect the first 1 or 2 tracks. (I experienced this with cdj 100s and 200s.)

I tried to clear the disc, but it didn't make a change. I tried with 2 other original discs, one of them has been already played that night, but it didn't play any of them. I've tried playing from the usb, but the right deck didn't play from there, too, whilst a track has been being played on the left deck from the usb.

Videos:

http://youtu.be/CSSJrzC2BEU

http://youtu.be/2Gfe9HS-i-4

http://youtu.be/_XfXt8OaET4

After watching these 3 videos... and the right deck completely failing on someone AT a gig... I will not be purchasing any pioneer products. Sorry pioneer, but why put a faulty product on the market for people to waste money on? Good luck everyone, I hope they can fix your broken stuff. :(

Fabio Mandity watch my problem:

https://www.youtube.com/watch?v=Blkd9SIscIo

Authorized Service Provider does not know how to fix it .... I'll be fighting for a refund!!

My unit is currently back with the retailer. It has developed a loud hiss on the output when no music is being played or you can hear it over the top if playing at a lower volume. It also crashed just before the first dance at at wedding a few weeks ago!!!!!. After I updated to firmware 1.10 the stupid thing thought it was in midi mode after about an hours use (even though it was still saying remote box connected on the display) I had to go to cd then back to USB for the unit to function again (right deck only doing this). Being a wedding dj I can't have this or any professional dj for that matter :-(

I'm curious to know what the retailer does for you about the hiss issue. Mine has done the same thing since day one on all the outputs.

Did you send your unit back Josh? I will let you know what the outcome is.

No, I haven't sent it back or anything at this point. I was trying to see what info I can find out about the issue first. Yeah, please let me know what they do for you. I appreciate it!

hola amigos, les comento que acabo de actualizar mi pioneer xdj r1 a la version 1.10 y los platos dejaron de funcionar,tambien quiero decir que estan activados los modos vinyl, tenia instalado la version anterior 1.09 y me funcionaba a la perfcion,por favor necesito que me digan como solucionarlo,gracias.

Following up on some items in this thread...

For users who have experienced hardware failure, please contact Pioneer technical support or your retailer to have the unit serviced or exchanged. Users who have had their units repaired or replaced have not continued to have these issues after.

Because there are now many users posting a variety of problems, I'm marking this post closed. If you continue to have issues and require support please post YOUR OWN THREAD (you can post a link back to this one as well so we can look back to find previous info) and we will be glad to help you. Thanks!